Sima VS-712 EX User Manual download pdf (Page 11)

Page 11

Operation

When AC power is first applied, all outputs will be muted and all the lights will come on for 1 second

and then go out. The Power / Stand-by light will be lit dim red. The Auto Input and Volume

Stabilization modes will be active as default. When the unit detects an active video input (composite, S-

Video, or component video), the Power / Standby light will turn off full and the active input will be

selected.

Power

As long as AC power is not lost, the previous status (last selected input, Volume Stabilizer mode and

AUTO SELECT status) will be resumed when Power / Stand-by is pushed. If AC power was lost, the

unit will default with input #1 (both View and Record) selected, Volume Stabilization on and AUTO

SELECT on.

View Inputs

Pushing a view input button on either the front panel or on the IR remote, will cause the view current

input and associated LED to go off and the new input to come on. If the Auto Input Mode is on, the

selected input will over ride the current input until another input is selected or another input is

automatically detected.

Record Inputs

Pushing a record input button on the IR remote, will cause the current record input and associated LED to

go off and the new input to come on. To set the record input from the IR remote control, first press the

record button on the remote control, which will cause all of the record input LEDs to become lit. Within

3 seconds press the number of the input you wish to direct to the record output.

Auto Select Mode

If the Auto Select Mode is active, the unit will select a video signal from the View video inputs. If a

second input becomes active, the VS-712EX will automatically change to the new input. If you want to

go to another A/V source, simply select the input using the front panel button or the remote. If you don’t

want the VS-712EX to automatically select an active input, turn the AUTO SELECT mode off. Please

note when you activate Auto Select Mode, it scans the inputs when the VS-712EX is on or in the stand-

by mode.

When the unit is in the standby mode, the Power/Standby light will be dim

and all other lights will be off

When a video device is turned on, like a VCR on Input #1, the

Power/Standby LED will turn off, the input corresponding to the device will

turn on, along with the Auto Select LED.

If a second device is turned on (say the DVD player on input #2) the # 2 light

will illuminate and it will be selected and fed to your TV

If the second device is turned off, after about 5 seconds, input #1 will be

selected.

If both devices are turned off, after about 5 seconds, the VS-712EX will turn

off and go into standby mode waiting for an input.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

No comments

Sima VS-712 EX User Manual Page 11