Sima CP-150 User Manual download pdf (Page 10)

Image Bank Troubleshooting

IV Troubleshooting

Disk Full

If the Busy and Ready LEDs are off and the LCD panel is blinking showing the HD icon and the

first and fifth partition bars, it means the CP-150’s hard drive is full. You need to transfer some

files to your PC and erase files from the CP-150 hard drive.

Note: The hard drive is “full” when there is less than 2 times the amount of the memory card’s

total space.

File system error

If the Busy and Ready LEDs are off and the LCD panel is blinking showing the HD icon and first

three partition bars, it means the HDD has a file system error. The HDD might be unformatted.

You might have to use your PC to re-format this drive. note: all files will be lost when this is done.

Consult your computer documentation.

Faulty SM card

If the Busy and Ready LEDs are off and the LCD panel is blinking showing the SM icon and the

first three partition bars it means the SM card has a file system error. The SM card might be

unformatted. Use your camera to format the SM card as necessary.

Faulty CF card

If the Busy and Ready LEDs are off and the LCD panel is blinking showing the CF icon and the

first three partition bars, it means the CF card has a file system error. The CF card might be

unformatted. . Use your camera to format as necessary.

Internal Error

If the Busy and Ready LEDs are off and the LCD panel is blinking showing only the five partition

bars, it means Image Bank has an internal error. Please contact Sima customer service at 800-

345-7462 or 412-828-3700.

Remark:

We strongly recommend using SCANDISK, a Win98/2000’s system tool, to

scan and check the CP-150’s hard drive every couple months.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Sima CP-150 User Manual Page 10