Sima SVS-4D User Manual download pdf (Page 6)

Page 6

Typical Hook up

This shows a overview of a typical system with the SVS-4D using 4 A/V sources, a TV and Surround

system. The outputs of up to 4 devices can feed into the inputs on the SVS-4D. It can then select one of

the devices to watch on your TV and/or listen on your receiver. Refer to the diagrams on the next few

pages for more detailed connection diagrams.

Figure 4, Overview of typical system

Step 1

Connect the AC adapter to 120 VAC and plug the DC cord into the 15 v input on the SVS-4D.

Step 2

You need to determine how you want to use your system.

If you want to watch and listen to the video sources on your TV and / or your surround sound receiver,

see figure 5 on page 8. This diagram only shows inputs 1 and 2 being used. Inputs 3 and 4 are

connected in the same manner.

If you want to be able to watch the video sources on your TV, listen on your surround sound receiver and

tape from the sources plugged into the SVS-4D, see figure 6 on page 9. This shows how to connect one

of the outputs of the SVS-4D to the Audio and Video inputs on the VCR that you will use for recording.

Note: Do not select the same input that the recording VCR is connected to (input 4 in this

diagram) while recording or loud feedback could occur.

If you only have composite video signals or only S-Video signals, then use the one type in your system.

If your TV only has composite video inputs, you must use all composite video signals into the SVS-4D as

it will not

convert S-Video signals to composite video.

Note: the SVS-4D does not convert analog audio to digital audio or visa versa.

Power supply

Use the 15V DC adapter (included) to provide power for the SVS-4D.

The adapter connects to the unit as shown in the diagram at left and

plugs into a standard 120V AC wall outlet.

1 2 3 4 5 6 7 8 9 10 11 ... 18 19

No comments

Sima SVS-4D User Manual Page 6