Sima SVS-4D User Manual download pdf (Page 8)

Page 8

Typical Hook Up #1

Figure 5 below shows a hook-up showing only two input sources. Be sure you use either S-Video or

composite video inputs, but not both on the same input. The one SVS-4D output goes to the TV so you

can watch and listen on your TV. The second output (audio only) goes to the stereo receiver so you can

listen to music or surround sound audio using your stereo receiver.

Figure 5, Hook-up in typical system

Note 1: Use of the S-video output requires TV to have S-video input.

Note 2:Connect L&R audio output to hear audio from TV set with stereo receiver off.

Note: Remember to always connect the outputs on your VCR/DSS/DVD/etc. to the inputs on the SVS-4D.

Likewise, connect the outputs on the SVS-4D to the inputs on the TV/VCR/Receiver/etc..

Note: If you have one or more devices that are not stereo and have a single audio output, you have two

options. 1) Use a “Y” adapter (available from any electronics store) to split the mono signal into two signals

to feed both the Left and Right inputs on the SVS-4D. 2) Use just the left connector for the audio of that

source.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

No comments

Sima SVS-4D User Manual Page 8